Yellowing of PVC foam boards surface

Yellowing of PVC foam boards surface

Cause analysis：The extrusion temperature is too high and the stability of the stabilizer is insufficient. Solution：To adjust the processing temperature,if there is no improvement,the formula can be adjusted,and the dosage of stabilizer and lubricant can be increased appropriately, which can be changed one by one, so that it is easy to find out the problem quickly and solve the problem at the fastest speed.

2023-02-19

图片名称
Cells in cross section

Cells in cross section

Cause Analysis:Insufficient melt strength,there are two reasons, one is overdosage of blowing agent or the proportion is not coordinated,or the qulity problems of foam regulator. The second is poor plasticization, low processing temperature or overdosage of lubrication. Solution: a.To adjust the dosage of blowing agent and replace with a better foam regulator. b.To adjust the processing temperature. For details,please feel free to contact our company.

2023-02-19

图片名称
Board thickness is uneven

Board thickness is uneven

Cause Analysis: a.Discharge was uneven b.Flow rate was too fast c.Overdosage of external lubricant and shortage of internal lubricant d.Mold temperature setting is unreasonable Solution： a.To adjust the height of the die lip b.To adjust the choke rod c.To adjust the formula d.To adjust the mold temperature. For details,please feel free to contact our company.

2023-02-19

图片名称
Introduction of Quality Oxidized polyethylene wax prices china

Introduction of Quality Oxidized polyethylene wax prices china

Quality Oxidized polyethylene wax prices china is made of polyethylene wax after oxidation by a special oxidation process. Quality Oxidized polyethylene wax prices china can be used as a dispersant, lubricant, brightener, and coupler concentrating agent or for fillers Color masterbatches, polypropylene masterbatches, additive masterbatches, and filling masterbatches.

2023-02-17

图片名称
Brief introduction of Customized Oxidized polyethylene wax from China

Brief introduction of Customized Oxidized polyethylene wax from China

Customized Oxidized polyethylene wax from China is an excellent new type of polar wax. Since the molecular chain of oxidized polyethylene wax has a certain amount of carbonyl and hydroxyl groups, the compatibility with fillers, pigments, and polar resins has been significantly improved. Customized Oxidized polyethylene wax from China has better wettability and dispersibility in polar systems than polyethylene wax, and it also has coupling properties.

2023-02-09

图片名称
< 1...14151617 >
图片名称

WeChat

图片名称

WhatsApp

What we offered to customers shall be our excellent products and distinguished services; our promises to customers shall be above anything else.

Contact Information

fuyu

sales@feihengchem.com；；；；

fuyu

+8618363066337

fuyu

+8618363066337

fuyu

Factory Address：Shangchan Street, Zao Yuan Sub-district Office, Zhangqiu District, Jinan City, Shandong Province.
 

Office address:Building 4C, Double Creation Base, 7888 Jingshi East Road, Shuangshan Street, Zhangqiu District, Jinan, Shandong Province

COPYRIGHT 2022 Jinan Feiheng New Materials Co., Ltd. 鲁ICP备2022032347号-1

Powered by: www.300.cn  JiNan  SEO